Configuring the TM Printer Network Settings
- Connect the printer to a PC via the USB cable.
- Turn on the printer.
- Open the EpsonNet Config application.
- Select the printer and click on the [Configuration] button
- Click [Network]-[Basic (Wireless)] and configure the SSID and security settings according to the networks.
- Could be required to configure the [TCP/IP]-[Basic] and [TCP/IP]-[DNS] according to the networks.
- Click [Transmit]. The settings to send the information to the TM printer and the screen returns to EpsonNet Config application.
- Click the [Refresh] button to get the changes reflected. It could take some time, be patient!
- IP Address will be required later for Advanced Printer Driver installation process.
- Close the EpsonNet Config application.
- Disconnect the printer USB cable from the PC.